"MECO-G" AC Frequency Transducers convert a sinusoidal AC signal into a standard DC signal which is directly proportional to the measured input signal, These outputs are accurate, reliable, consistent and stable which are suitable for Telemetering, Dataloggers, PLC's, SCADA systems and control applications.
Accuracy | ± 0.5% of Rated output, ± 0.2 % (Optional) |
Output Ripple | 0.2% RMS |
Response | Less than 0.5 Sec. |
Frequency | 50 / 60 Hz. |
Zero Adj. | ± 2% Min |
Span Adi. | ±10 % Min. |
Operating Temp. | 0° ~ 50° C (RH < 90 %) Non - Condensing |
Storage Temp | -20°C ~ 70°C |
Overload Continuous | 2 x Rated Current, 1.2 x Rated Voltage |
Breakdown Impulse Voltage | 4.5KV , 1 x 40µs (without dewing.) |
Tempreature Coefficient | 0.03% / °C. |
Dielectric Withstand Voltage between Input / Output / Power / Case |
2 KV AC for 1 minute. |
Insulation Resistance (@ 500V DC) | >100MΩ |
TYPE | MODEL | INPUT RANGES | DIMENSION |
---|---|---|---|
FREQUENCY (Input Voltage) |
R-FT | 45-55, 40-60, 55-65, 360-440 Hz (anyone) 0-63.5, 110, 230, 440 V (anyone) |
Size 1 |
DC OUTPUT RANGES | |
---|---|
0-1V | ≥ 1KΩ |
0-5V | ≥ 5KΩ |
1-5V | ≥ 5KΩ |
0-10V | ≥ 10KΩ |
2-10V | ≥ 10KΩ |
0-1mA | ≤ 10KΩ |
0-5mA | ≤ 2KΩ |
0-10mA | ≤ 1KΩ |
4-20mA | ≤ 500Ω |
AUXILLIARY POWER SUPPLY |
---|
0-110 VAC ± 10% 50/60 Hz 2VA Approx. |
0-220 VAC ± 10% 50/60 Hz 2VA Approx. |
0-24 VDC ± 10% 2Watts Approx. |
0-48 VDC ± 10% 2Watts Approx. |
0-110 VDC ± 10% 2Watts Approx. |
0-220 VDC ± 10% 2Watts Approx. |