+91-22-2414 9657
ISO 9001:2008
FEATURES

 

"MECO-G" Signal Isolating and DC Isolation Transducers provide a stable ripple free & optically Isolated DC output signal for various DC voltage & current Input signals. These outputs are accurate, reliable, consistent and stable which are suitable for Telemetering, Dataloggers, PLC's, SCADA systems and control applications.

GENERAL SPECIFICATION
Accuracy ± 0.5% of Rated output, ± 0.2 % (Optional)
Output Ripple 0.2% RMS
Response Less than 0.5 Sec.
Frequency 50 / 60 Hz.
Zero Adj. ± 2% Min
Span Adi. ±10 % Min.
Operating Temp. 0° ~ 50° C (RH < 90 %) Non - Condensing
Storage Temp -20°C to 70°C
Overload Continuous 2 x Rated Current, 1.2 x Rated Voltage
Breakdown Impulse Voltage 4.5KV , 1 x 40µs (Without Dewing)
Tempreature Coefficient 0.03% / °C.
Dielectric Withstand Voltage
between Input / Output / Power / Case
2 KV AC for 1 minute.
Insulation Resistance (@ 500V DC) >100MΩ

INPUT RANGES ANY ONE)
0-75mV, 100mV, 1V, 5V, 10V, 1-5V, 2-10V, 360V
0-1mA, 0-5mA, 0-10mA, 2-10mA, 0-20mA, 4-20mA.
Model: R-DTI can accept both negative and positive input signals.
Model: R-SIT can only accept positive input signals.
DC OUTPUT RANGES
0-1V ≥ 1KΩ
0-5V ≥ 5KΩ
1-5V ≥ 5KΩ
0-10V ≥ 10KΩ
2-10V ≥ 10KΩ
0-1mA ≤ 10KΩ
0-5mA ≤ 2KΩ
0-10mA ≤ 1KΩ
4-20mA / 4-12-20mA ≤ 500Ω

AUXILLIARY POWER SUPPLY
0-110 VAC ± 10% 50/60 Hz 2VA Approx.
0-220 VAC ± 10% 50/60 Hz 2VA Approx.
0-24 VDC ± 10% 2Watts Approx.
0-48 VDC ± 10% 2Watts Approx.
0-110 VDC ± 10% 2Watts Approx.
0-220 VDC ± 10% 2Watts Approx.
CONNECTION DIAGRAMS